Looking for an affordable Christmas gift project? These reversible DIY wood coasters are not only customizable for the holiday season, but also perfect for everyday use! Team up with a coffee gift card for the perfect gift.
This post contains some affiliate products in which I earn a small percentage from qualifying purchases at no extra cost to you.
We needed 4 Christmas gifts. Finding out the recipients loved Starbucks, that made my job really easy! They have the most adorable gift cards now, but I fell hard from the ugly Christmas sweater shape. So cool!
But a coffee gift card alone is just a gift card… wouldn’t it be fun to also plop that fab beverage on a cute coaster?!
Creating diy coasters (see all of mine HERE) is a VERY easy craft that doesn’t break the bank since you can make these with virtually any scrap piece of wood. However this round, I wanted something festive. But something that could also be used every day of the year…
So I came up with a reversible coaster idea that is a quick project that is SO easy to make, can use any stencils you may have on hand, or use the ones I did to create duplicates!
The project is a simple one, but I feel the addition of the coasters made a huge impact! And a little touch of homemade.
Here’s how I made these so you can too!
Reversible Diy Wood Coasters: Customizable For Christmas And Everyday Use!
Supplies used:
Homestead Blend Coffee stencil
National Brewers Coffee stencil
Fusion Mineral Paint in Casement and Coal Black (get 10% off)
(Use code funkyjunkinteriorsfmp for 10% off at checkout as well.)
Scrap wood (I used reclaimed wood fence planks)
Stencils used above:
Preparing the wood
1. Measure the diameter of a board of board, then mark of the same measurement in the other direction, and cut along that line.
The wood chunks were cut from fence boards, in exact squares. These are beefy coasters! However you could also use different types of wood such as wood firewood slices, thinner plywood, etc. I personally like to use individual boards at a coaster size I like so I don’t require a table saw.
How to cut perfect square coasters out of a wood plank
2. Use the newly cut coaster, tracing the size with pencil lines onto the same board to create as many individual coasters as desired.
I vote to cut way more wooden drink coasters than you think you’ll need. Once you get going, this DIY is positively contageous! Plus come in so handy as affordable teacher or hostess gifts.
3. Lightly sand the boards on both sides and along the edges with a medium to fine grit sandpaper.
Stenciling Christmas coasters in white
4. Position a mix of Christmas stencils along the tops of the boards, then stencil the images in Fusion Mineral Paint’s Casement for white.
Tip: If you are gifting a set, design them side-by-side or as a block of 4 so you can pick and choose how they look with each other for a cohesive look.
How to stencil for flawless results with no paint bleed:
- Dip a dome tipped stencil brush into paint.
- Remove most paint onto a rag until brush feels dry.
- Tap or swirl paint through stencil for the desired effect.
Aren’t they cute?! I like how some graphics are positioned off the edges too.
Now let’s do something equally fun on the other side too, so these beverage coasters are in-season year around!
Stenciling coffee-crate coasters in black
5. Turn the coasters stenciled side down.
6. Choose a mix of crate-styled stencils to get this random rustic crate look.
Stencil in Fusion’s Coal Black for an authentic crate-stamped look.
To create coffee-themed coasters, a medley of coffee beans, chunks of coffee stencils, anything that looked like a rustic coffee-themed crate did the trick!
Additional stencils shown above:
Top coating options for water protection
7. Top-coat the entire surface with a water-resistant product or varnish if desired.
If you prefer a food safe option, you can use Fusion Mineral Paint’s Beeswax.
For a higher durability, I like to use Fusion’s Stain and Finishing Oil. Just know, even the Natural tone will darken up the tone of the raw wood.
I just left mine as-is without a topcoat, since cedar wood and Fusion are both incredibly durable.
8. To gift, stack the coasters, wrap with rustic twine and a candy cane or decorative item of choice, and slip a coffee gift card underneath the twine.
They are cute enough to gift as-is, or you could of course tuck them into a gift bag if desired!
Other stencils that would work well for coasters
The sky’s the limit on how you can decorate DIY coasters! Here’s a few more stencils to consider:
Coffee lovers tote gifting idea
Want to go one step further? You can even create a DIY toolbox, include a jar of coffee and go full gift basket style!
How to make these rustic wood coffee coasters with a toolbox tote HERE
Festive red DIY coasters
Some wood beverage coasters in red for a super festive touch… bright and fun!
Stencils used above:
Below are a few more DIY wood coasters I’ve made in the past that may help fuel additional inspiration for you!
Other unique DIY wood coasters to make:
Route 66 puzzle style coasters… (this stencil is no longer available)
Wood slice coasters…
And woodsy coasters.
I love them all!
You might say I’m a coaster fanatic.
I blame it entirely on my coffee addition though…
Love these coasters, Donna!
What a wonderful idea!!
Love the look of these Donna and the fact that they’re reversible. I must say I’m a big fan of making coasters too, especially since we have a huge stock pile of pallets out back just begging to be coasterfied 😉
I just love those coasters, the crate sides just as much as the festive ones. Great idea Donna and beautifully done!
Merry Christmas!
the coaster idea is awesome. I love gifts like this…handmade touches and simplicity! That’s what it’s all about to me.
Donna,
Oh, how I love those coasters and the fact you can use them all year around. Also, for sharing on your blog since I am not a follower on Instagram. Your whole collection is nice also.
The coasters just complete the gift…love them!
Love the chunky coasters! I was going to sew some but I love these way more. Thanks for sharing Lisa@ Sweet Tea N’ Salty Air
Hi Donna. Glad for you to hear you’re back where you love to be. I hope your stay in Hawaii is incredible, which it will be. Also, really love the coasters. What a unique and adorable way to use wood pieces. I love them all. Would have trouble choosing painted(the Christmas red yes please)or the rustic wood. I would use them all. Thanks for the post!
These look great! Did you spray paint or – if not- what kind of paint did you use with the stencils on wood?
Hi Jo-Ann! I believe I used white acrylic craft paint for these. I also love to use Fusion Mineral Paint. Casement is their version of the whitest white I believe.
Hi! I love these! Did you use a sealer on these at all? If so, what kind? And if not, did the paint not come off after having a wet glass on it and the water did not soak into the wood?
Hi Danielle!
I tried sealing one with wax but didn’t like how it darkened the wood, so I left them bare. I have never had an issue with paint coming off. You could use Tough Coat by Fusion Mineral Paint if concerned, however it does add a slight glossy sheen to the wood.
Ok thank you. I make the picture ceramic tile coasters and I make stamped coasters on the tumbler stone and use sealers for both so I wasn’t sure if these actually needed to be sealed! Worth a try for sure! Thank you!
These are adorable! I think I am a little late to asking a question… but do you seal these when you are done painting?
Thanks!
Hi Tori!
You certainly can! I generally don’t because they’re reclaimed wood and I use a paint that does will with no topcoat (Fusion Mineral Paint) however Fusion has a fab product called Tough Coat that leaves a matte – satin clear finish. You could also use a wood wax, or hemp oil. Any would work. I’d just test the coat on scrap wood as they all darken the tones somewhat. Good question!
Hi Donna!
Merry Christmas!
As I’ve said before, I LOVE your style, your projects, your stencils..all of it!
I have a quick question! ? I’m making some wood coasters to give as gifts tomorrow. (What?! Think of it as last minute Christmas shopping! Lol!) In your tutorial you said to sand the edges. I noticed a couple of other diy-er’s said the same thing. My question is why not sand the whole coaster? Is there any particular reason for not sanding the entire piece?
Thank you ?
Debbie
Hey Debbie! Thank-you!
I think everyone just means to emphasize that the fresh cuts will be sliver inducing sharp. An overall sanding is fine, I just wouldn’t go overboard or you may lose the old patina.
p.s. Good for you! I’m baking my first batch of cookies at 10:30 pm Christmas Eve so allow me to join your 11th hour club! haha Merry Christmas!
Good morning. Love the wood coasters. How does one protect these from stains?
You could easily coat them with wax, hemp oil or some kind of clear coat meant for wood.
Love your work! Can’t wait to make some with the grandkids for gifts for their teachers. Hope you have a wonderful holiday..
Apparently I am channeling the 2016 you 6 years later in 2022. I got out all my stuff to paint over some bird coasters, but before I stenciled I decided I should see what was on pinterest. I probably saw yours all those years ago and it was actually a subliminal message to copy them. I swear even when I think I have original idea you prove me wrong!